JS Panther brand JS polymer waterproof coating is up to absorb domestic and foreign technology developed waterproof material, two-component waterproof coating by organic liquid and inorganic powder compound and into. It is combined with the high elasticity of organic materials and inorganic materials, such as good durability, and can form a high - strength and high - strength waterproof coating film layer, and has the advantages of simple construction and preparation of color coating, etc..

First, the characteristics of

JS-II polymer cement waterproof coating with a variety of high elastic copolymer emulsion and a variety of polymer additives. According to a certain proportion of cement mixed with cement can be used, the waterproof coating has excellent anti permeability, crack resistance, durability of the acid resistance. The product has the advantages of no toxicity, no pollution and convenient construction, and is a new generation of environmental protection type waterproof material.

Two, use

1, mainly used for external walls, bathroom, bathroom, kitchen, basement, tunnel, road, water tank, waterproof, anti leakage, moisture and other projects.

2, for the aerated concrete, hollow brick and other porous materials, moisture and leakage proof.

3, dry and wet base construction work can be.

Three, the main technical performance

1, solid content is more than 65%

2, the tensile strength is not less than 1.8%

3, the elongation of more than 80% teams

4, impervious 30min, 0.3Mpa impervious

Four, the use of methods

1, basic treatment: the base surface should be flat, solid, no honeycomb, surface voids, dust, dirt and other surface attachment, yin and yang angle should be made into a circular arc shape, before construction to deal with the basic defect repair, waterproof construction requirements.

2, to cement, concrete and cement mortar surface must reach the solidification period before construction.

3, waterproof coating preparation and construction: according to emulsion: cement =1: (0.6~0.8) the weight of the preparation, and then the preparation of the coating roll two to three times, the thickness of waterproof standard requirements. Brushing interval of about 1-2 hours per time (specific to the weather, environmental conditions appropriate adjustments to non stick hand is appropriate)

4, enhancement: waterproof layer can be enhanced as required, matrix reinforced by non-woven fabric or fiber cloth.

5, emulsion dosage: 1~2kg/m2

Five, matters needing attention

1, cement 325# above ordinary portland cement or slag cement, is strictly prohibited the use of early strength cement or cement.

2, the ingredients should be strictly formulated, stirring, stirring time shall not be less than 5 minutes.

3, the emulsion should be 5 degrees ~40 degrees under the sealed storage, shelf life of 12 months.

4, construction temperature: 5 degree or above.

5, packaging specifications for the 5Kg/ barrel, 20Kg/ barrel, 25Kg/ barrel, 50Kg/ barrel.