The classic black panther JS waterproof packaging barrel

The Panther JS cement mortar waterproof emulsion adding a certain proportion of mixed use, can be formed with good corrosion resistance, durability, impermeability and adhesion, compactness and high efficiency, and the waterproof anti-corrosion effect. For soda ash production medium, urea, ammonium nitrate, water, hydrochloric acid and acid salt corrosion, JS-II waterproof emulsion and sand, and ordinary cement high strength cement mortar by emulsion blending affinity, the number of direct block or scraping, is formed on the surface of the concrete waterproof anticorrosive mortar layer is strong, combination of toughness and rigidity waterproof good anti-corrosion materials. Mixed with cement and sand mortar can be modified, can be used for processing and underground engineering building walls and ground waterproof layer.

Type: JS-II type

Appearance: liquid / milk white

Packaging: paint standard barrel

Weight: 25kg

A panther anti JS II emulsion, safety and environmental protection, by polymer modified emulsion composed of waterproof and anticorrosive system. Addition of base materials and the right amount of additives, selection of imported materials and domestic high-quality accessories, by the plastic refining, mixing, and other working procedures for the processing of polymer waterproof emulsion, long service life, convenient construction. Application range of products for use; roof, interior and exterior wall, toilet, kitchen, basement, tunnel, road, water pool, leakage proof, waterproof and moisture proof system. Can also be used for indoor and outdoor, as enhanced adhesive decorative brick, surface material, suitable brick, mosaic, ceramic tile, marble, granite, gypsum board, wood flooring, polystyrene insulation board can be used, its structure is more rigid.

Coating preparation

Preparation of weight proportion; cement 0.8 parts +1 waterproof emulsion construction method

Use: as a waterproof layer processing 1, basic: primary surface should be smooth, solid, no honeycomb, surface voids, dust, dirt and other surface attachment. 2, sealing treatment: a waterproof emulsion matrix on the surface of the first brush for back treatment. 3, brushing the use: 1 copies of +0.8 cement ratio of the emulsion = added to the mixing, as the use of waterproof coating.

Usage two: for the paste with (and water) 1, basic treatment: the surface should be clean and clean, no dust dirt treatment. 2, decorative material surface should be clean, dry too should be soaked in water, dried in the shade. 3, with the first waterproof emulsion of the base and the surface decoration materials the first brush for back treatment. 4, waterproof latex: cement: Sand: =1:2 (4~6) and the weight ratio of mixing, scraping on the decorative material adhering surface, paste thickness should be 5.0~8.0mm, and then attached to the substrate, leveling, compaction. 5, natural curing at room temperature 24~48 hours, 5 days to achieve the best bond strength.

The construction requirements of surface wet or dry (no water) can be the coating construction, the environment of the building to adapt to a wide range, no special requirements, the construction is very simple.

Coating dosage 1~1.2kg/m2

Acceptance test

The waterproof layer should be done, 6~7 can test the maintenance interval as acceptance, acceptance of the general practical method is divided into the following two; 1 water test: good water retaining wall, in the space to test water 24 hours, check whether there is leakage, the method used in indoor plane construction site, such as roof, pool, kitchen, bath guard room. 2 water test: waterproof layer acceptance is commonly used in the facade of building structure, inclined roof, wall and so on, with the water in the well wall, 30 minutes of uninterrupted spray from top to bottom, 4 hours later to observe whether the other side of the wall leakage, no leakage. Water leaching test is large, in the large area of the roof, exterior wall and so on need to do leaching water test, I suggested that the use of natural forces, and so on in rainy days to do more appropriate.

For more details, welcome to consult.