Analysis of leakage causes of glazed tile roof:

Because the roof tile floor pouring large and steep slope, the actual construction has certain difficulty, therefore lead to local vibration of glazed tile floor, there is no dense bee hole phenomenon, coupled with the glazed tile floor without doing waterproof treatment, caused directly by the rain after the glazed tile seam enters into indoor floor.

Glazed tile roof leakage Water Leakage the situation is more complex, involving tile roof and eaves gutter, etc. out of roof structure waterproof. According to this characteristic, we have developed a glazed tile roof waterproof system plan. Glazed tile roof waterproofing system is made of pure acrylic emulsion, high quality pigments and fillers on the quality of the JS composite waterproof coating, waterproof system assisted by sewing polyester cloth is formed, the system can be a fan of glazed tile roof of the mouth, pipe out of roof and dormer windows, glazed tile joint, and gutter other waterproof weak parts provides a perfect solution, it has excellent fatigue resistance, aging resistance, low temperature flexibility and excellent elasticity, is a glazed tile roof waterproofing experts.

Glazed tile roof leakage to determine the area to be waterproof:

Glazed tile roof generally has the following areas need to do waterproof processing: horizontal lapping, lapping, vertical fan, air conditioner, pipe out of roof, glazed tile roof, around, gutter, glazed tile and parapet at the junction of waterproof weak link.

Glazed tile roof leakage pretreatment:

Before construction carefully check the glazed tile roof, to ensure that the roof firmly, clean, no oil, no dust and other debris, do not meet the above conditions are as follows:

A, replace the damaged tiles, and add the firmware at the appropriate location.

B, horizontal or vertical tile roof lap lap improper place, make the appropriate adjustments, until the whole tile roof water flowing, and then coated with a layer of base coating.

C, remove dust and other dirt.

Leakage construction technology of glazed tile roof:

A, glazed tile roof lap joint:

Glazed tile roof overlap in the first layer of the coating, in its still wet, with JS composite waterproof coating repeatedly brushing, until reaching a certain thickness, can play the best waterproof effect. For the part of a wide gap, the seam woven polyester fabric embedded therein, and then from the top with the base paint to fully infiltrated seam woven polyester fabric, so that the whole dry.

Highlight B, glazed tile roof (such as chimneys, vents, fan mouth etc.):

Cut the size and shape of suitable sewing polyester cloth, and according to the technical requirements of cutting, the protrusion around is coated with a layer of base paint, cut good sewing polyester cloth on it, then from the above base coating fully infiltrated sewing polyester cloth, ensure no foaming, wrinkle. Finally, in the above populations of two-component polyurethane waterproof coating.

C, glazed tile roof gutter and the other is not part of the cover tile:

Gutter joint, water hole at the first local grassroots waterproof coating, it is still in the wet covered sewing polyester cloth, from above with waterproof slurry fully infiltrated sewing polyester cloth, and the whole stem. At least 12 hours after the whole brushing again two-component polyurethane waterproof coating.

D, in the area to do a good job in water treatment or two layer of waterproof coating, can be deployed into a variety of colors.

E, finally, the glazed tile roof of the comprehensive spraying silicone hydrophobic agent. In a vertical form a total of two times spraying to prevent leakage. Silicone hydrophobic agent is environmentally friendly products, do not change the original base color, not easy to stick to the dust, do not affect the tile decorative effect.

Through the above method after the treatment of roof, due to the large number of pores and micro cracks are closed by water repellent, hydrophobic coating layer and hydrophobic agent formed in the tile roof, so the rain fell like a lotus leaf like to stay in the outer wall, which eliminate the infiltration Water Leakage to source, so as to achieve waterproof the purpose of.

F, local water leakage positions can be inverted high pressure grouting waterproof treatment at the bottom.